NKS1002

Switch
SPECIFICATIONS
Switch Function: 2, 4, 6, 8 and 10 positions for piano DIP switch;
2 thru 12 positions for low profile DIP switch .
Contact Rating: Switch: 25mA @ 24V DC
Carry: 100mA @ 50V DC
Insulation Resistance: 100 MMin. @ 500V DC
Contact Resistance: Initial: 50 mtypical @ 2-4V DC @ 100mA
After Life: 100mtypical @ 2-4 DC @ 100mA
Operating Life: 2,000 make-and-break cycles, each circuit
Operating Force: 1000 gf max.
Travel (Actuator): 2.0 mm typical
Dielectric Strength: 500V RMS min. @ sea level between adjacent terminals
Temperature Range: Operating/Storage: -40° C to 85° C
Vibration: To MIL-STD-202F, Method 201 A
Shock: To MIL-STD-202F, Method 213B, Condition A
Soldering
Recommendations: Wave: 500 F (260 C) for 5s max;
Hand: 30W soldering iron @ 608 F (320 C) for 2s
typical. Keep all switches in the “OFF” position during
soldering and cleaning process.
MATERIALS
Housing and Actuator: Glass filled polyester (PBT) UL94-V0
Contacts: Phosphor Bronze with gold plate over nickel plate
Terminals: Phosphor Bronze with gold plate over nickel plate
Tape: Mylar
PACKAGING
Switches are supplied in standard IC tubes with all poles “OFF”.